Although it is true that the Android mobile device companies that sell the most terminals in recent times are Samsung and now also Huawei, we cannot help but consider that there are still many other companies to take into account in this type of case. The truth is that we also have the Japanese Sony as another of the leading firms in the segment, and in this case in particular we did not want to fail to mention a very requested tutorial around the Sony Xperia Z5.
The truth is that the Sony Xperia Z5 is one of the most recent high-end devices launched by this company, insofar as it possesses some excellent characteristics. Beyond that, in any case, we can see that the Sony Xperia Z5 can be shown with certain glitches. It should be noted, in this sense, that if your Sony Xperia Z5 stops at the logo when it turns on and does not go beyond there, fortunately there is a tutorial that will allow you to get out of this problem quickly and easily.
But before the details, let’s talk a little more about these types of problems with the Sony Xperia Z5 logo, which can basically be divided into two drawbacks: Brick and Bootloop.. Basically the difference is that in the first case the terminal does not even reach the logo, while in the second it does, although in both cases we will find that the same tutorial will have to be carried out, so if you experience any of these problems, read on.
Skip the Sony Xperia Z5 logo
Well, if you have experienced the problems described above then, the first thing you have to do is make sure you have the original USB cable for the device, as well as a Windows computer. At the same time, You will have to have at hand the Stock ROM or original firmware of your Sony Xperia Z5 device. You have to know that this last file is in FTF format and if you don’t have it available, you can always download it to your Sony Xperia Z5 through this link.
Once you have downloaded the previous file, then you have to download others, specifically the Sony Flash Tool through this link for your computer. When you have finished that download, it is then time to download the USB Drivers for Sony Xperia Z5 from this link. Then you already have all the necessary elements to be able to restart your Sony Xperia Z5 and use it again as before, so we are going to leave you the step by step that you should consider in these situations.
Well, then you take your Sony Xperia Z5 and install the Flash Tool. Then you have to download the FTF firmware through the link we have left above. The next step is to put the downloaded FTF in the folder Firmware in the directory where Sony FlashTool is installed. Later, you have to install all the Drivers in a folder that you will not lose for any reason. The Sony Xperia also have a tool in these cases called PC Companion where you can find them.
Open Flash Tool, and click on the lightning bolt icon in the upper left corner, selecting the Flashmode option. Then you select the FTF file downloaded in the “firmware” section of the left window of FlashTool. You will see that a list appears in which one of the options is Wipe, which is basically where the factory reset options are located. Once you have marked all the options, then you have to hit the Flash button.
When you have finished the previous step, you will see that FlashTool prepares the FTF Firmware for installation / flash, and it is then time to restart your Xperia Z5 in Flashmode mode, once you connect it to the computer, following the instructions in the case of the program. If you have performed all the steps accordingly, then you should have no problem running this tutorial, but you always know that you can leave us feedback about it.