Samsung Galaxy Tutorial guide to flash Samsung Galaxy Ace 4 Today I want to leave you a simple tutorial guide where I'm going ...

Samsung Galaxy Tutorial guide to flash Samsung Galaxy Ace 4 Today I want to leave you a simple tutorial guide where I’m going …

Today I want to leave you a simple tutorial guide where I am going to teach you how to flash your Samsung Galaxy Ace 4 in a fairly simple way and in a few steps. So that even any user with basic knowledge on the subject can perform this procedure.

Keep in mind that this kind of thing voids the warranty of your mobile, you have to take this into account before continuing, in addition to that in case something goes wrong, we are not responsible for said problem, in any case, if you continue step by step all this tutorial to the letter is impossible that you have problems.

What do we need before starting?

First of all, it is essential to have the battery of our device fully charged.

You have to download the Stock ROM of Samsung Galaxy Ace 4 which you can get at this link, remember to look for the model that corresponds to your mobile, not just any.

You will also need to download Odin and also the USB drivers so that it recognizes the mobile once it is connected to the computer.

We recommend you use original USB cable in order to avoid any kind of connection error that may occur in the middle of the process.

USB debugging must be enabled yes or yes. It can be enabled from Settings> Developer options. In case you do not see the options, you will have to unlock them, you do this in Settings> About the device and there you press several times in a row on Build number until a sign appears that unlocks the options mentioned above.

How to flash Samsung Galaxy Ace 4

We turn off the mobile and once it is completely off we are going to press and hold the buttons volume low + power + home for several seconds, we wait and you will have to request a confirmation, at that moment you must press volume up.

We are in download mode, so you have to open Odin on the computer and then connect the device to it.

When you do, a message should appear that says Added at the top left.

After that you are going to press on the button that says PDA and select the ROM file.

Once finished you must go under everything where it says Start and wait for the process to finish.

If everything went well the device will restart and in the upper left will say PASS with a green background.