Mobile Tutorials How to Fix the Error in the Link2SD Mounting Script Among all the queries we usually receive in our emails and ...

Mobile Tutorials How to Fix the Error in the Link2SD Mounting Script Among all the queries we usually receive in our emails and …

Among all the queries that we usually receive in our emails and comments, there is one that has been repeated a lot in recent times, directly related to an error that Link2SD appears when increasing the storage capacity of an Android mobile. Specific, This tutorial can be extremely useful for all those users who at one time or another have encountered the message “the assembly script cannot be created”, so here is the solution.

The first thing you have to consider in this regard is that Link2SD is an application that has been specially developed to allow moving program files from internal to external memory, linking both spaces so that they can recognize each other. Once you have created the participation in this regard, you can move any application or content from one space to another without problems. It is a system that works with devices operated on Android 2.0 or later versions of Android.

Beyond what we have mentioned, you have to know that Link2SD produces some operating problems, a script error that does not allow us to use the system even though we have carried out all the steps the way they had to do it, and the idea is to be able to overcome all these obstacles as soon as possible. Once all these elements have been considered, The following will not only teach how to overcome Link2SD problems, but also how to install and use this platform.

Fixing the Link2SD error

Well, thinking about leaving behind the error in the Link2SD mounting script, the first thing you have to do is have all this system in question installed, for which you will have to root the Android mobile, what you can do by following the different tutorials that appear in this link. When you have completed that task, it will be time to download and install BusyBox, something you can do directly from this link. Completed that, you have to install the Terminal Emulator from this link. Finally, you must install the Link2SD from this link.

Once you have finished with all the previous elements, then we will start with the tutorial to fix the error in the Link2SD mount script. The first thing to do is create a partition type “primary ext2” on the SD memory that does not exceed 1 GB of storage space. To do this, you have to use the program Minitool Partition Wizard for Windows, a tool that you can download from this link.

Then you have to open the Link2SD application on your Android device. As soon as you do, you will see a screen appear with information about the new participation. You select the “ext2” and then click on continue, until the program will tell you that a “script” has been created. Then you do a quick reboot and close the program. You go back to the Android mobile device, and open the Terminal Application application. On the command line, then add mount -t ext2 / dev / block / vold / 179: 2 / data / sdext2 ”(No quotes).

If the procedure was successful, codes such as “-T = ..”, which means that everything is correct. Then you have to exit the system and re-enter it. When you have done it, you should go to Options, More, Quick Reboot. After this procedure, it is time to go to Android, open the Link2SD application again and we should see a box in which we will be asked what type of partition you have created. Exit the message and close the application.

You open the Terminal Emulator again and enter the command “itsmount -o remount, rw -t yaffs2 / dev / block / vold / 179: 2 / system“When you are done, it will be time to use Link2SD without problems, as soon as possible.

Have you been able to fix Link2SD problems with this step by step?

Although generally most of the tutorials that we teach are rather general, to call them in some way, from time to time we receive inquiries about others that are much more specific, and we do not want to leave them aside, as is the case on this occasion of the step by step to fix error in Link2SD mount script. The first thing we have to say about it is that it is an error that Link2SD throws when increasing the internal memory of an Android device, and that seems to affect many users.

Basically, you can distinguish this problem because the classic message of “the mount script cannot be created“, so that if you have encountered it, you have to know that we have the solution to your problem, and that it is available in the following lines. Continuing with some general applications, we must say that Link2SD is an application that allows you to move program files from internal to external memory, normally used to make space, of course.

The truth is that the developers of the application explain in this regard that it is an app specially developed for Android mobile devices that works with practically all versions of these, so we must not stop recommending it if it is your case and you want to give it that use . Beyond that, we have to point out that some devices present the script error that we have mentioned before, so if this is your case, then we will try to provide you with more information about it.

Link2SD mount error

Well, the first thing you have to do to fix this error is to root your device. Once you have done it, you have to download and install BusyBox through this link. When you are done, you must follow the same steps with Terminal Emulator from this link. Finally, you have to install Link2SD from this link. You must remember that without the above steps, it is impossible to develop the tutorial to fix the error in the Link2SD mount script, so meet all of them.

When you are done with that, you must create a partition type “primary ext2” in the SD memory that does not exceed 1 GB of storage capacity, and then it is time to open the Link2SD application on the Android device, at which time a screen will appear with the information of the partition created. We give ext2, and then click on Continue. Then, the program will tell us that we have created a script, and will ask us to perform a quick reboot, after which we must close it.