Alcatel Download How to Download ROM for Alcatel One Touch 4010a Downloading a ROM for a specific device is not for nothing ...

Alcatel Download How to Download ROM for Alcatel One Touch 4010a Downloading a ROM for a specific device is not for nothing …

Downloading a ROM for a specific device is not complicated at all, in this article I want to show you how you should do to Download Stock ROM for Alcatel One Touch 4010a And besides that, I show you step by step how you will install it so that your mobile works correctly.

The reasons for install a Stock ROM There may be many, but the best of all is that any user who has very basic knowledge on the subject can perform the entire process that I am going to comment on below, so on that subject you should not worry, it only takes a little patience to be able to do everything correctly.

Before downloading and installing ROM for Alcatel

You have to have your mobile battery over 70%, the ideal would be that while you download the ROM you leave it charging.

Obviously you must also download the Alcatel One Touch 4010a Stock ROM that we are going to install later from here.

You must make sure you have the original USB cable, the one that came with the mobile phone, in order to perform this process correctly and without errors.

In turn, it is important that you download the necessary USB drivers for the computer to detect the connected mobile.

Also download SP Flash Tool for PC.

Flashing Stock ROM on Alcatel One Touch 4010a

You have to turn off your mobile and then remove the battery.

I imagine you already have SP Flash Tool on your computer, open the program from Flash_Tool.exe

Now that you have it open, you will go to where it says Download.

In that tab you will see a button that says scatter-loading, press the same button and you will have to choose the scatter file that you downloaded earlier, the ROM file basically.

Once ready, you will have to click where it says download to start the procedure.

When you start it, you must connect the mobile without battery to the computer by pressing and holding the volume down key so that it detects it.

At the end a green ring appears warning you that everything went well.