Windows How to Install TWRP Recovery from Windows with this Simple Guide In case you want to install TWRP Recovery from a PC …

In case you want install TWRP Recovery from a PC using fastbootIn this tutorial guide I want to show you exactly how you have to do it and in less than five minutes you will have Recovery on your mobile device without any kind of problem. It is quite simple to do it and if you follow the instructions that I am going to leave you a little below to the letter, I can assure you that in a short time you will have the TWRP Recovery on your device without any kind of problems.

Guide: Install TWRP via fastboot

You have to keep in mind that the device’s battery should be at least 80% before continuing.

It is essential that you have the original USB cable to avoid any kind of connection problem.

Also, the bootloader must be unlocked, whatever device it is.

You have to have the USB drivers for your mobile device, in addition to this, it is necessary to have the TWRP Recovery .img that is compatible with your mobile, obviously not just anyone.

You also have to have it installed on Windows ADB and Fastboot which you can download from here.

USB debugging has to be activated, you can find this option in Developer options in Settings. In case you have these “Developer options” blocked, what you will have to do is go to Settings> About device and press several times on the build number, until a message appears.

How to install TWRP Recovery

Now go to the folder where you have the TWRP Recovery image, you will have to hold down the shift button and right-click on a blank space, after that, simply choose the option that says “Open command window here”.

Next, you will have to connect the phone to the PC, in the command window you will have to write “adb reboot bootloader“Without quotes obviously.

Look at the phone, it may ask for permissions, you must accept if it does.

Once the device is restarted, what remains to be done is to type again in the command window the following “fastboot flash filename.img from Recovery” and ready. This means that in case the .img file you had put twrp.img then you will have to write “fastboot flash twrp.img”.

The next thing you have to do is simply type “fastboot reboot” and voila.