Install twrp and root ZTE Blade A510 with magisk or supersu. Guide on how to install twrp 3.2.1-0 recovery through smart phone flash tool, and then root your ZTE Blade A510 phone with magisk or supersu, using the custom twrp recovery installed, to get the most out of it and to access options which are only available if you have root access on your phone.
Getting root on the ZTE Blade A510 phone or rooting this terminal means allowing the user to have elevated privileges, with the objective of overcoming the limitations imposed by the device manufacturer or the operator that is offering the terminal.
Previous steps and recommendations before continuing with the guide on how to download and install twrp and root ZTE Blade A510 with magisk or supersu
- (Required) Download and install mediatek mtk driver auto installer on your pc / computer, so that you can connect your ZTE Blade A510 phone with the computer correctly and thus continue with the root process. Battery, at least 60% to prevent the device from turning off during the process.
- (Required) Through the following guide you have to enable usb debugging and developer option on your ZTE Blade A510 phone before rooting. You can also enable allow oem unlocking, if the option is available.
- Before continuing with the guide on how to install twrp and root ZTE Blade A510 with magisk or supersu, unlock the device’s bootloader (some mediatek devices come with the unlocked bootloader). By unlocking the bootloader you will completely lose all personal data saved on your device. Recommended, make a backup to be on the safe side and in case something goes wrong.
[box type=»info» align=»alignleft» class=»» width=»»]The custom twrp 3.2.1-0 recovery has been released for all Android devices. Download and install (update) it and then root with magisk or supersu the android device, phone or tablet.[/box]
ZTE Blade A510 Key Features and Specifications
Android 6.0 operating system. MediaTek MKT6735P processor – 4 cores at 1 GHz. 5 ″ TFT IPS screen. HD resolution (1280 x 720). Dual SIM MicroSIM / NanoSIM SIM. Memory. RAM 1GB. Internal storage 8 GB Expandable Micro SD up to 32GB. Camera. Rear 13Mpx. CMOS sensor. Front 5Mpx. GSM 90018001900MHz networks. WCDMA 90019002100. LTE 800/900/1800/2100/2600 M. Wi-Fi 802.11 b / g / n connectivity. Bluetooth 4.1. Micro USB. A-GPS. Dimensions and Weight Dimensions 143 x 70.9 x 8.2 mm Weight 150 gr 2200mAh battery
Files needed to continue with the guide on how to download and install twrp and root ZTE Blade A510 with magisk or supersu
[box type=»info» align=»aligncenter» class=»» width=»»]Of interest, related to the topic: Create the Scatter File for all MediaTek devices[/box]
Choose to download magisk or supersu to root your ZTE Blade A510 phone after installing twrp custom recovery.
- supersu v2.82 (download and move the file in the phone memory).
- magisk v15-2 (downloads and moves the file in the phone memory).
Install twrp and root ZTE Blade A510 with magisk or supersu
Step 1: After completing the steps in the section with previous recommendations and downloading the necessary files, you can continue with the guide to install the custom twrp recovery downloaded from above, using the smart phone flash tool, on your ZTE Blade A510 phone.
Step 2: Then depending on the root option you have chosen:
- Guide to root with SuperSu downloaded from above, through twrp custom recovery installed in step 1 your ZTE Blade A510 phone.
- Guide to root with magisk downloaded from above, using the custom twrp recovery installed in step 1 your ZTE Blade A510.
Get the most out of your device! Make a nandroid backup through the custom recovery installed, and then be able to restore the entire system in case you need it. Highly recommended, create a backup copy of the EFS partition that stores identification information of your device. That’s it. This is the guide on, how to install twrp and root ZTE Blade A510 with magisk or supersu.
