Download and install Windows 10 in Spanish with Media Creation Tool. Guide on a common, logical and simple solution, adapted to the user with basic computer skills. Not so fast but reliable, when it comes to using your computer normally again, the solution will be to download and install Windows 10 in Spanish with Media Creation Tool from scratch.
Your computer may over time, for one reason or another, slow down, display error messages, or a virus encrypts your personal files. In this article I will explain step by step, how to download and install Windows 10 in Spanish with Media Creation Tool from scratch and you will do all this.
To date, Windows 10 is the latest operating system developed by the Microsoft team. The system was launched in 2015, adding more and more users since then. It is a light, functional system and, above all, safe thanks to the cumulative updates.
Download and install Windows 10 in Spanish with Media Creation Tool
Minimum requirements: For your Windows 10 operating system to function properly, your computer has to comply with some minimum requirements. A number of informational notes and the following requirements are detailed on the Windows System Requirements and Specifications page:
Processor: 1 GHz or faster or SoCRAM: 1 gigabyte (GiB) for 32-bit or 2 GB for 64-bitHard disk space: 16GB for 32-bit or 20GB for 64-bitGraphic card: DirectX 9 or later with a WDDM 1.0 driverScreen: 800 x 600
[amazon box="B010S3VVJW"]
Have you read about basic requirements, because the recommended ones for a good experience will be about 4 GiB of memory on your computer and then, with this memory, another aspect with which you will also notice an improvement would be to have a solid hard disk or SSD instead of the mechanical hard disk, since it will be faster both in reading, as well as in writing. Continue with the guide on how to download and install Windows 10 in Spanish with Media Creation Tool.
To date, there are new computers that meet these requirements, but perhaps some of these do not have an SSD hard drive. Paying a little more for a computer with an SSD disk is a good decision, in this way it will increase the start of it from about 6 to 10 times.
Creating the installation media with the Media Creation Tool
Long ago and in old versions of Windows, the operating system would be searched for and downloaded from the internet from the new media. To avoid security issues, Microsoft provides downloading and installing Windows 10 in Spanish with Media Creation Tool, a USB media creation tool, directly.
Step 1: By accessing the Windows 10 download page from your Windows 7, Windows 8.1 or Windows 10 operating system you will have the option to download Media Creation Tool the media creation tool. Continue with the guide on how to download and install Windows 10 in Spanish with Media Creation Tool.
Step 2: Once downloaded, run it and then the tool will download the Windows 10 operating system, creating the installation media on a USB memory, for example, which must have a capacity of at least 3 GiB.
- Download and run Windows 10 Media Creation Tool.
- Choose the option ‘Create installation media for another PC’.
- Select the language, architecture and version of Windows to install.
- Choose to create a Flash drive.
Preparing to install Windows 10
If you have Windows 7 or Windows 8.1 installed on your computer, you can upgrade to the new Windows 10 operating system without losing your data and installed programs through Media Creation Tool, but we recommend a clean installation, from scratch. Continue with the guide on how to download and install Windows 10 in Spanish with Media Creation Tool.
First step: Once you have ready the Windows 10 installation medium prepared in the previous steps, in the form of a USB memory, with the computer turned off and this installation medium connected with your computer to a USB port, you have to start it, so that it starts, from this USB installation medium.
How to install and update drivers in windows 10
Depending on the manufacturer, starting the computer from an installation medium may vary slightly. You try pressing any of the following keys, when the computer starts up and you see the logo on the screen: F2, F8, F10, F12, DELETE. Also, the ESC key allows you to select the unit from which you want to start. Acer: F2 or Delete. Asus: F2 or F10. Dell: F2, F1, Delete, F12 or F3. HP: F10 or Esc.Lenovo: F1 or F2. Sony: F2, F3, F1 or assist key. Toshiba: F2, F1, Esc
Step 1: Once the computer has booted from the USB installation medium, after a few seconds of loading, you will see the initial window of the Windows installation wizard. Continue with the guide on how to download and install Windows 10 in Spanish with Media Creation Tool.
Step 2: In the window you must configure something like the language you want, for the Windows 10 operating system and the type of keyboard you will use. Then click on “Next” and in the next window click on “Install Now”.
Uninstall programs from Windows 10 Remove an application in Windows
Step 3: In the next step, the installation wizard will ask you to enter the license number. If the license is recorded in the BIOS / UEFI of the equipment, this window will not appear, otherwise, if you have it, you can enter it or, if not, click on “I don’t have a product key” to continue the installation without the license.
Step 4: In the next window, the wizard will ask you for the version of the Windows 10 operating system that you want to install. You must choose the system that corresponds to your license or if you do not have it, choose the system you want. Tap on Next and accept the license terms to continue.
Step 5: Another window will appear, (a very important step) where you must choose the type of installation you want. Continue with the guide on how to download and install Windows 10 in Spanish with Media Creation Tool.
- To update Windows and not lose your data or applications, choose “Upgrade”.
- For a clean install, choose “Custom”.
You have to select the second option, custom, for a clean installation. Next, we will see a new step in the wizard where you must choose the partition of the hard disk where the wizard will copy the Windows files. If you want to create partitions, click on “New” and configure the space that you want to use for the Windows system that you will install. If you do nothing, the wizard will automatically use all the space to install Windows (and create a single partition). Tap on “Next” and the installation process will begin.
Wait for the installation process to finish, during which the computer may restart several times, and look at the screen where you can see different phases of both the installation wizard and the initial configuration of our Windows 10. This is it. This is the guide on how to download and install Windows 10 in Spanish with Media Creation Tool.