Saltar al contenido
Contact : alejandrasalcedo0288@gmail.com

Save battery in Wear OS, enjoy more of your smart watch

The current technology has a great impediment and is that of the battery, we have to be constantly aware of the percentage of battery. This happens to us in smartphones, gadgets and even in electric cars, although there are always some tricks and tips that will allow us save battery as is the case with Smart Watches. We show you the best tricks and tips to save battery in Wear Os.

We tell you the best tricks and tips to make the battery of your smartwatch be able to resist more time, some simple tips that will allow you to enjoy a superior autonomy.

Don't always have the screen active

The screen is one of the aspects that consumes the most battery, although this has a simple solution. We can only activate the screen when lifting the face or pressing on the button of our smart watch for this you must follow these steps:

  1. Swipe down from the top of the screen.
  2. Touch Settings –screen.
  3. At the bottom of the screen, tap on the option Always active screen and disable this option.

In this way we will achieve a much higher autonomy, saving battery in Wear OS in a considered way.

Use official spheres

In the Android world, personalization is very important and therefore we can find a large number of applications that allow us to install spheres in our smartwatch. The problem is that many of them are not perfectly adapted to our model and may lead to errors as an excessive battery consumption.

For this we recommend that you use the official application and install one of the many areas you will find.

Save battery in Wear Os with spheres

Save battery in Wear OS by deactivating notifications

The use of the smartwatch allows us to be constantly connected, even if we cannot use our smartphone, a great advantage that we did not have before. Although this can lead us to receive a large number of notifications in our grimace, many of them unnecessary.

To prevent the battery from running out before we want, we can configure what notifications we receive on our watch, such as the calls, messages or Whatshapps of some specific contacts, for this we must follow the following steps:

  1. On the mobile, open the Wear OS by Google application.
  2. Scroll down to "Settings" and touchNotificationsBlock app notifications.
  3. To block another application, tap Add more.
  4. Touch the application you want to block.

Uninstall applications that consume too much

As with our smartphone, there are many applications that although they can work correctly in Wear OS, do not make good use of the battery or resources. If we verify that an application is ballasting the battery of our smartwatch, it is best to uninstall it and look for a better alternative.

To deactivate applications the steps are very simple:

  1. Press the power button.
  2. Scroll down and touch Play store.
  3. Swipe down from the top of the screen and touch My applications.
  4. Touch the application you want to remove, scroll to the bottom of the screen and touch Uninstall.

Motorola 360 Save battery in Wear OS

How to know what the battery is consuming?

If we have not recently installed any application and we have already made the advice that we mentioned above, you will not know what affects your smartwatch and is causing the battery to run out sooner than you want. To know what your battery is consuming, we have as in mobile phones, a section where to check.

To access this information we must do the following:

  1. Connect our phone to the clock.
  2. On the phone, open the Wear OS by Google application.
  3. Scroll down to "Settings" and touchAdvanced settings –Clock battery.

In this way we can know at all times what our battery is consuming and the best way to avoid it. Our smartwatch offers us many advantages, so taking care of it and saving battery in Wear OS is so important.

Rate this post