Saltar al contenido
Contact : alejandrasalcedo0288@gmail.com

This is the Xiaomi MiPad inside: Disassembly, hardware and curiosities

Today we bring you an analysis of the hardware of the Xiaomi MiPad, a tablet presented a few weeks ago and that presents some characteristics of infarction. A processor NVIDIA Tegra K1, 2GB, a high resolution screen of 2048 × 1536 pixels, 8MP rear camera, front five and 6700mAh Of battery. All that to a price of about 179 € To the change.

A technical barbarity which they have analyzed to know where the trick is and above all Know in which components Xiaomi decides to lower costs.

Xiaomi MiPad, inside

The MiPad tablet is constructed of quite resistant materials, at least IT168 specifies, who are responsible for this disassembly by parts.

Most tweaks have been added to offer stability and cooling, and is that the NVIDIA Tegra K1 processor that incorporates generates a considerable amount of energy that a lot of heat is produced next to a thin body. Together with that SoC we have 2GB RAM branded SKhynix.

mipad-20 "src =" https://elandroidelibre.elespanol.com/wp-content/uploads/2014/06/mipad-20-680x453.jpg "width =" 680 "height =" 453 "/></p>
<p>As for the structure we have something quite simple: <strong>three plastic covered sections</strong> where the different chips are stored, although always on the top of the board. On the outside a metal box attached to the base plate difficult to remove.</p>
<p>The MiPad <strong>It does not have 3G / 4G chip although it does have double speakers</strong>. The battery comes from the hand of LG and brings 6520mAh, while we also have in the images the microUSB adapter, the speakers and the notification LED. Two cameras with 8MP and 5MP with f / 2.0 aperture.</p>
<p><img class=

Rate this post