Saltar al contenido
Contact : alejandrasalcedo0288@gmail.com

IPhone 11 series filtered specifications »ERdC

IPhone 11 series leaked specifications

5 (100%) one vote

The launch of the iPhone 11 series It is scheduled for September 10 as recently revealed. Like last year, the American company Advertise three models. The specifications of the three phones in the series They have leaked online.

The three models that will make up the series are the iPhone 11 (the successor of the iPhone XR), the Pro (the successor of the iPhone XS) and the Pro max (the successor of the iPhone XS Max).

iPhone 11

I will come with a LCD technology screen Like the iPhone XR. Screen size still 6.1 inches and the resolution has not changed either, staying in 1792 x 828 pixels with a pixel density of 326 ppi. The phone will have the technology Faceid but not 3D Touch.

The iPhone 11 be powered by the new Apple A13 chipset to be combined with 4 GB of RAM. With respect to the cameras, the iPhone 11 come with a 12 MP front camera and dual rear cameras whose configurations have not yet been revealed.

It will also have support for Wireless reverse charging and Wi-Fi 6.

iPhone 11 Pro

The iPhone 11 Pro will have a smaller screen of 5.8 inches, but with technology OLED. The panel will have a resolution of 2346 x 1125 pixels and a pixel density of 458 ppi. Neither will have 3D Touch but come with the Face ID technology.

Count on him Apple A13 chipset under your cap and combine with 6 GB of RAM. It will also have a 12 MP front camerawhile their rear cameras they will become triple. Like the iPhone 11, admit Wireless reverse charging and Wi-Fi 6.

iPhone 11 Pro Max

The successor of the iPhone XS Max will keep the 6.5-inch OLED display with a resolution of 2688 x 1242 pixels, like its predecessor. Neither will have 3D Touch but have Face ID.

Like the other two, the Apple A13 It is the SoC that enhance its functions. The chipset will be accompanied by 6 GB of RAM. The front camera be a 12 MP sensor, while on its back count on a triple camera module. Will also have Wireless reverse charging and Wi-Fi 6.

The three terminals will use a square housing around its camera sensors. This will be located in the upper left area of ​​the back of the device, and also include the LED flash. This design is similar to what has been revealed to mount the Google Pixel 4 and Pixel 4 XL series of devices.

Source

Te ha parecido interesante esta noticia? Puedes dejarnos un comentario con tu opinin, te lo agradeceremos.  

SHARE THE NEWS WITH YOUR FRIENDS:

Rate this post