Alleged Redmi 8 Pro with filtered cudruple camera ┬╗ERdC

Alleged Redmi 8 Pro with filtered cudruple camera ┬╗ERdC

Alleged Redmi 8 Pro with filtered cudruple camera

5 (100%) one vote

A telephone Xiaomi with model variants M1908C3JG and M1908C3JH has been certified by the Federal Communications Commission (FCC) in the U.S. The FCC documents of the M1908C3JG / H telephone contain important details. It allows us to see several images, variants, screen size and dimensions. Since it is equipped with a cudruple camera system on its back, it is speculated that it may be the alleged Redmi 8 Pro. There seems to be the future Redmi Note 8 by Some specifications below the Redmi Note 7.

Design of the alleged Redmi 8 Pro

The images of the M1908C3JG / H listed in the FCC document show that it presents a screen with a drop type notch. The chin of the device is a bit thick and has Engraved Redmi stamp. The rear view of the phone reveals that its back cover has a gradient color finish. This finish begins with light blue at the top and appears purple towards the bottom.

A vertical cudruple camera configuration It is placed in the upper left corner along with the LED flash. You can also see a classic fingerprint reader on the back of the device. You can see a volume control and a power key on the right edge of the terminal.

Some leaked specifications

The FCC documents of the M1908C3JG / H indicate that It measures 158.29 x 75.3mm. The diagonal extension of the telephone is 166mm. The above is equivalent to having a about 6.1 inch screen. There is no information about the screen resolution.

The smartphone supports Dual band Wi-Fi, Bluetooth 4.2 and USB-C port. The Redmi Note 7 has Bluetooth 5.0 so it is unlikely that its successor will lower the level in specifications. For the above, it could be the hypothetical Redmi 8 Pro. FCC presentations have revealed that they will come in two variants. 3 GB of RAM + 32 GB of storage and 4 GB of RAM + 64 GB of storage. In addition to these details, there is no further information available on the alleged Redmi 8 Pro.

Filtered specifications of the alleged Redmi 8A

Last week, a Redmi M1908C3IC was seen in TENAA with its full specifications. Recently a new leak revealed images of his variant M1908C3IH. It is speculated that the M1908C3IC / H device may debut as Redmi 8A.

The supposed Redmi 8A measures 156.3 x 75.4 x 9.4 mm and weigh 190 grams. It houses a screen 6.2 inch IPS LCD with drop-shaped notch and HD + resolution 720 x 1520 pixels. It is said that the phone is powered by the chipset Snapdragon 439.

Run Android 9 Pie As operating system. The rear of the supposed Redmi 8A has a configuration of dual camera with a main lens of 12MP. On its front there is a 8 megapixel sensor. It has a large battery 5,000 capacity mAh which supports a fast load of 10W.

Sources: 1, 2, 3

Te ha parecido interesante esta noticia? Puedes dejarnos un comentario con tu opinin, te lo agradeceremos.